Formulation and process optimization of doxorubicin-loaded PLGA nanoparticles and its in vitro release / 药学学报

Doxorubicin-loaded PLGA nanoparticles (DOX-PLGA NPs) was prepared by double emulsion (W/O/W) solvent evaporation method with the biodegradable materials-poly (lactic-co-glycolic acid) (PLGA) used as carrier materials. Single-factor test was used to investigate the influence of the type and ratio of the organic phase, the amount of surfactant, PLGA concentration, the ratio of external water phase and oil phase (W/O), the ratio of doxorubicin and PLGA, ultrasonic time and stirring time on the preparation of nanoparticles. The best formulation and preparation conditions were optimized by orthogonal test based on single-factor test, evaluation indicator as particle size and entrapment efficiency, and the results were analyzed by overall desirability. And the in vitro release behaviors of the nanoparticles were studied as well. The size distribution, zeta potential, morphology of DOX-PLGA NPs were characterized by laser light scattering and transmission electron microscopy; encapsulation efficiency and releasing behavior of DOX-PLGA NPs in vitro were investigated by ultraviolet spectrophotometry. The results show that the DOX-PLGA NPs are regularly spherical in shape with the mean size of (189.2 +/- 5.3) nm, and the zeta-potential of the NPs is about (-28.32 +/- 0.52) mV. Drug loading and encapsulation efficiency are estimated to be (73.16 +/- 0.43) % and (1.51 +/- 0.07) %, respectively. The cumulative percentage of the drug released is 90.34%, and the in vitro release behavior made up of initial burst release and sustained-release could be described by the bidirectional kinetic equation. The results indicate that hydrophilic small-molecule drugs could be successfully entrapped into PLGA-NPs. With optimization of the formulation and preparation conditions, we obtained uniform and stable DOX-PLGA NPs with sustained release character in vitro and pH-sensitive property, which could provide the experimental basis for the development of a new anti-tumor sustained-release formulation.

Chitosan-coated ophthalmic submicro emulsion for pilocarpine nitrate / 药学学报

The study is to design chitosan-coated pilocarpine nitrate submicro emulsion (CS-PN/SE) for the development of a novel mucoadhesive submicro emulsion, aiming to prolong the precorneal retention time and improve the ocular absorption. CS-PN/SE was fabricated in two steps: firstly, pilocarpine nitrate submicro emulsion (PN/SE) was prepared by high-speed shear with medium chain triglycerides (MCT) as oil phase and Tween 80 as the main emulsifier, and then incubated with chitosan (CS) acetic solution. The preparation process was optimized by central composite design-response surface methodology. Besides the particle size, zeta potential, entrapment efficiency and micromorphology were investigated, CS-PN/SE's precorneal residence properties and miotic effect were especially studied using New Zealand rabbits as the animal model. When CS-PN/SE was administered topically to rabbit eyes, the ocular clearance and the mean resident time (MRT) of pilocarpine nitrate were found to be dramatically improved (P < 0.05) compared with PN/SE and pilocarpine nitrate solution (PNs), since the K(CS-PN/SE) was declined to 0.006 4 +/- 0.000 3 min(-1) while MRT was prolonged up to 155.4 min. Pharmacodynamics results showed that the maximum miosis of CS-PN/SE was as high as 46.3%, while the miotic response lasted 480 min which is 255 min and 105 min longer than that of PNs and PN/SE, respectively. A larger area under the miotic percentage vs time curve (AUC) of CS-PN/SE was exhibited which is 1.6 folds and 1.2 folds as much as that of PNs and PN/SE, respectively (P < 0.05). Therefore, CS-PN/SE could enhance the duration of action and ocular bioavailability by improving the precorneal residence and ocular absorption significantly.

Preparation of polyelectrolyte microcapsules containing ferrosoferric oxide nanoparticles / 药学学报

In this study, polyelectrolyte microcapsules have been fabricated by biocompatible ferrosoferric oxide nanoparticles (Fe3O4 NPs) and poly allyamine hydrochloride (PAH) using layer by layer assembly technique. The Fe3O4 NPs were prepared by chemical co-precipitation, and characterized by transmission electron microscopy (TEM) and infrared spectrum (IR). Quartz cell also was used as a substrate for building multilayer films to evaluate the capability of forming planar film. The result showed that Fe3O4 NPs were selectively deposited on the surface of quartz cell. Microcapsules containing Fe3O4 NPs were fabricated by Fe3O4 NPs and PAH alternately self-assembly on calcium carbonate microparticles firstly, then 0.2 molL(-1) EDTA was used to remove the calcium carbonate. Scanning electron microscopy (SEM), Zetasizer and vibrating sample magnetometer (VSM) were used to characterize the microcapsule's morphology, size and magnetic properties. The result revealed that Fe3O4 NPs and PAH were successfully deposited on the surface of CaCO3 microparticles, the microcapsule manifested superparamagnetism, size and saturation magnetization were 4.9 +/- 1.2 microm and 8.94 emu x g(-1), respectively. As a model drug, Rhodamin B isothiocyanate labeled bovine serum albumin (RBITC-BSA) was encapsulated in microcapsule depended on pH sensitive of the microcapsule film. When pH 5.0, drug add in was 2 mg, the encapsulation efficiency was (86.08 +/- 3.36) % and the drug loading was 8.01 +/- 0.30 mg x m(L-1).

Preparation of cationic dextran microspheres loaded with tetanus toxoid and study on the mechanism of protein loading / 药学学报

The aim of this study is to prepare cationic biodegradable dextran microspheres loaded with tetanus toxoid (TT) and to investigate the mechanism of protein loading. Positively charged microspheres were prepared by polymerization of hydroxylethyl methacrylate derivatized dextran (dex-HEMA) and dimethyl aminoethyl methacrylate (DMAEMA) in an aqueous two-phase system. The loading of the microspheres with TT was based on electrostatic attraction. The net positive surface charge increased with increasing amounts of DMAEMA. Confocal images showed fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) could penetrate into cationic dextran microspheres but not natural dextran microspheres. TT loading efficiency by post-loading was higher compared with by pre-loading. Even though TT is incorporated in the hydrogel network based on electrostatic interaction, still a controlled release can be achieved by varying the initial network density of the microspheres.

Preparation of polyelectrolyte microcapsules contained gold nanoparticles / 药学学报

In this work, polyelectrolyte microcapsules containing gold nanoparticles were prepared via layer by layer assembly. Gold nanoparticles and poly (allyamine hydrochloride) (PAH) were coated on the CaCO3 microparticles. And then EDTA was used to remove the CaCO3 core. Scanning electron microscopy (SEM) was used to characterize the surface of microcapsules. SEM images indicate that the microcapsules and the polyelectrolyte multilayer were deposited on the surface of CaCO3 microparticles. FITC-bovine serum albumin (FITC-BSA, 2 mg) was incorporated in the CaCO3 microparticles by co-precipitation. Fluorescence microscopy was used to observe the fluorescence intensity of microcapsules. The encapsulation efficiency was (34.31 +/- 2.44) %. The drug loading was (43.75 +/- 3.12) mg g(-1).

Studies on diclofenac sodium pulsatile release pellets / 药学学报

<p><b>AIM</b>To investigate the preparation of diclofenac sodium pulsatile release pellets (DS-PRP), the release in vitro and the pharmacokinetics of the drug.</p><p><b>METHODS</b>Diclofenac sodium (DS) core pellets prepared by extrusion-spheronization technology were coated in a mini-fluidized bed spray coater with swelling material as the inner coating swelling layer and ethylcellulose aqueous dispersion as the outer coating controlled layer. The effects of formulation and medium on pulsatile release of DS were investigated under release rate test. Pharmacokinetic and bioavailability study in eight human subjects were performed by HPLC method.</p><p><b>RESULTS</b>The delayed-release time and release rate of DS from DS-PRP were influenced obviously by the swelling material, the concentration of SDS in medium, the coating level of the inner swelling layer and the outer controlled layer. In vitro, the delayed-release time T0.1 was 3.1 h, and the pulsed-release time T0.1-0.2 was 1.2 h. In vivo, the delayed-release time Tlag was 2.8 h, and the bioavailability was (91 +/- 12)%.</p><p><b>CONCLUSION</b>The release of drug from DS-PRP was shown to be in pulsed way both in vitro and in vivo.</p>